UDP800 FIRMWARE UPDATES
In this section you will have access to firmware updates of the Magnetar UDP800.
The firmware upgrade option will be only available when the player contains no disc or completely stops. Firmware is system software with functions for controlling the player. Since specifications for Blu-ray discs are new and being constantly improved, the Blu-ray discs issued after production of these players would adopt new specifications and have new functions. Therefore, to ensure optimal viewing experiences, the player firmware has to be updated from time to time. We strongly advise our users to upgrade the firmware through Internet directly from the player. USB installation is restricted to resellers or professional use only.
UDP 800 Version V5.69
99MB — 2023/04/14
1 – Edit: The « last memory » prompt box display time has been increased by a few seconds.
2 – Add: The subtitle adjustment menu can now adjust the height of internal subtitles.
3 – Fix: When the disc does not have internal subtitles, Disc external subtitles (in USB root folder) load fail.
4 – Fix: Audio stuttering during playback on some 4K UHD discs.
5 – Fix: Reverse video frame-by-frame or slow playback could cause crash during HEVC 4K UHD disc playback.
6 – Fix: A crash caused by irregular timeline subtitle files with external subtitles.
7 – Edit: Add a « border » effect to external subtitles.
8 – Edit: When the external subtitles are read till the end of the file, the last few subtitles are not loaded.
9 – Fix: Crash during CD RIP.
10 – Fix: When the CEC function is active, the SONY TV remote control return key cannot control the BD Player.
UDP 800 Version V5.19
87MB — 2023/02/15
1 – While Setup Menu TvSystem->AUTO and Resolution->1080I/P, play 23.976/24HZ film, HDMI no output of 23.976/24HZ.
2 – While Setup Menu Audio->Spdif->Bitstream, and the sound is muted. play BD/MOV and click BTN_NEXT, and then SPDIF will be UnMute.
3 – Play special video files(Audio is not supported, but video is supported). the playback will be auto paused.
4 – Standby power consumption slightly exceeds 0.5W.
5 – When playing SACD disc and outputting with DSD to the DAC, The left and right channels of Balanced Stereo Audio Output are not the same level.
6 – Edit: When playing 4K discs, slightly reduce the speed of the loader to reduce the noise of the loader.
7 – Add: Now you can adjust the PGS subtitles vertical coordinate in the subtitle adjustment menu.
8 – The last PGS subtitle on the disc cannot be displayed.
How to Update Firmware Using Network
If the network to which your player is connected is normal, you can upgrade your
player firmware through the network.
1 – Power ON your player and make sure that there is no disc inserted.
2 –Using your remote, click on « setup ».
3 – Select, « options » then « update » then « Network ».
6 – Do not power OFF your player during the update.
7 – After the upgrade reload the default settings « setup » then « options » then « load default ».
How to Update Firmware Using a USB Flash Drive
1 – On a USB disk root, create a folder « UPG » copy and past all the « .bin » files.
(For macOS users, format your USB key in “EXFAT”)
2 – Insert the USB disk into your player
3 – Power ON your player
4 –Using your remote, click on « setup »
5 – Select, « options » then « update » then « USB storage »
6 – Do not power OFF your player during the update
7 – After the upgrade reload the default settings « setup » then « options » then « load default »